Do your forks fit on a Razor Pro model headtube?
Yes, all of our forks will fit in the Razor Pro Model and Ultra Pro Model Headtube and they will fit any other standard 1 1/8" headtube as well. You need to use a bearing race with our forks, we will |
How do you install a bar wrap?
We get a lot of emails regarding instructions on how to install a bar wrap the right way. To start make sure the wrap and scooter are at a warm temperature, not hot. It needs to be warm enough to mak |
Threaded vs Threadless forks
Threaded forks have been around ever since Razor started making scooters. The downside with threaded forks is that because of the threads in the top tube, the thickness is actually greatly reduced. M |
ARE YOUR LUCKY SCOOTER BARS THREADED?
No, our bars have no threads on the inside. Almost all aftermarket bars do not have threads anymore. Even the newest Razor Pro Model Bars no longer have threads on the inside. But don’t worry they |
HOW DO YOU INSTALL SCOOTER GRIPS
We get a lot of emails regarding instructions on how to install scooter grips the right way. To start make sure the grips and scooter are room temperature. -Clean bar with soap/water bar thoroughly! |
HOW WIDE SHOULD I GET MY BARS?
Most riders recommend that you should use about the same width that your shoulders are as your width for your bars. This is so your arms reach straight down to help give you as much strength, support |
IF I NEED SCS HOW SHOULD I ORDER MY BARS?
The SCS accounts for 2" inches of total bar height, so if the rider needs 22" bar height, order 24". |
WHAT ARE YOUR PARTS MADE OF?
Almost all of our parts are made from 6061 Aircraft Grade Aluminum or 4130 Chromoly Steel. We use aluminum because is great to work with and is very strong and looks great, we use steel because for t |
WHAT DO I NEED TO DO TO KEEP MY LUCKY SCOOTER MAINTAINED?
Lucky Pro Blake Bailor will help you out. He does the following:
-Make sure that your compression system is tight. -Always tighten axle bolts before each ride. -For maximum grip, keep your grip t |
WHAT IS THE HEADTUBE ANGLE ON THE EVO2 COMPLETE, LUCKY CLOVER, LUCKY STRATA AND LUCKY CREW?
The headtube angle on the EVO2 complete is 82 degrees. The headtube angle on the Crew, Strata and Clover is 82.5º |
WHICH AXLE DO I NEED FOR MY LUCKY PEGS?
All of our pegs are compatible with different forks and decks. The important part of deciding on a peg will be which axle to pick for your scooter. All orders will come with axle spacers |
